Details
Plasti Dip® MATTE Solid Black 311g Aerosol
Recommended base colour: – BLACK
Includes one standard white nozzle.
Please note: – This is a MATTE FINISH, if you want it with a glossy finish, add a couple of coats of ‘FullDip® or Plasti Dip® GLOSSIFIER / FullDip® Super Gloss’. FullDip® and Plasti Dip® are 100% fully compatible to be sprayed over one another.
How to Spray – Aerosols:
- Surface must be clean and dry. For best results, avoid direct sunlight, high humidity, or breezy conditions.
- Shake can vigorously for one full minute after mixing ball begins to rattle. Shakeoften while applying.
- Hold can 6-10” from surface, moving can back and forth, slightly overlapping each stroke. Apply heavily enough to produce an even, wet appearance.
- Allow 30 minutes’ minimum between coats. Apply as many coats as desired (3-4average).
- Allow 4 hours’ minimum dry time before use. Coverage: Approximately 5-10 sq. ft. per can.
For best results:
- Pour into a jug
- Sit the can in the jug for a few minutes to warm it up
- Dry can and shake well
- Use as described leaving 10 mins between coats, 5 coats are best
- Leave overnight to dry and cure
