19 Regent Parade, Harrogate: Mon to Sat 9am - 5:30pm | Sundays 10am - 4pm

Plasti Dip® Matte Solid White Aerosol


1 in stock

SKU: 075815112071 Categories: , Tags: , , , ,


Plasti Dip® MATTE Solid White 311g Aerosol

Recommended base colour: – PRIMER GREY

Includes one standard white nozzle.

Please note: – This is a MATTE FINISH, if you want it with a glossy finish, add a couple of coats of ‘FullDip® or Plasti Dip® GLOSSIFIER / FullDip® Super Gloss’. Please see links below.  FullDip® and Plasti Dip® are 100% fully compatible to be sprayed over one another.

How to Spray – Aerosols: 

  1. Surface must be clean and dry. For best results, avoid direct sunlight, high humidity, or breezy conditions.
  2. Shake can vigorously for one full minute after mixing ball begins to rattle. Shakeoften while applying.
  3. Hold can 6-10” from surface, moving can back and forth, slightly overlapping each stroke. Apply heavily enough to produce an even, wet appearance.
  4. Allow 30 minutes’ minimum between coats. Apply as many coats as desired (3-4average).
  5. Allow 4 hours’ minimum dry time before use. Coverage: Approximately 5-10 sq. ft. per can.

For best results:

  1. Pour into a jug
  2. Sit the can in the jug for a few minutes to warm it up
  3. Dry can and shake well
  4. Use as described leaving 10 mins between coats, 5 coats are best
  5. Leave overnight to dry and cure

Additional information

Weight 0.4 kg


There are no reviews yet.

Be the first to review “Plasti Dip® Matte Solid White Aerosol”

Your email address will not be published.